Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time.

Important:

Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit.

It is recommended to charge the battery in a temperature between 10 oC and 30 oC (50 °F to 86 °F).

(The battery temperature should also be the same.)

Charging lamp [CHARGE] A

Lights up:

Charging (Battery charging time: l 14)

Goes off:

Charging completed

Flashing:

Be sure to connect the unit correctly (l 114)

Power lamp B

≥ This will light up when the AC cable is connected.

CAG-AC90P/PJ: AC cable (K2CA2CA00025; supplied)

AG-AC90PX: AC cable (K2CA2YY00129; supplied)

Insert the plugs as far as they will go.

1 Connect the AC cable to the battery charger and the AC outlet.

(AG-AC90P/PJ only)

Use the AC cable (K2CA2CA00025; supplied) dedicated for the battery charger.

2 Insert the battery into the battery charger by aligning the arrows.

We recommend using Panasonic batteries (l 14).

If you use other batteries, we cannot guarantee the quality of this product.

Do not heat or expose to flame.

Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

- 12 -

Page 12
Image 12
Panasonic AG-AC90PX, AG-AC90PJ operating instructions Charging the battery, Charging lamp Charge a, Power lamp B