Editing
Connecting to a PC
(File transfer/nonlinear editing)
When this device and a computer for editing are connected using a USB connection cable, image data in the SD card can be transferred.
≥Concerning
≥It is impossible to write data to the SD card on this unit from a PC
Operating environment (mass storage)
∫If using Windows
PC | IBM PC/AT compatible PC |
OS | Windows 8 (32 bit/64 bit) |
| Windows 7 (32 bit/64 bit) or SP1 |
| Windows Vista (32 bit) (SP2) |
| Windows XP (32 bit) (SP3) |
CPU | Windows 8/Windows 7/Windows Vista: 1 GHz or higher |
| |
| Windows XP: Intel Pentium III 450 MHz or higher or Intel Celeron |
| 400 MHz or higher |
RAM | Windows 8/Windows 7: 1 GB or more (32 bit)/2 GB or more (64 bit) |
| Windows Vista Home Basic: 512 MB or more |
| Windows Vista Home Premium/Business/Ultimate/Enterprise: |
| 1 GB or more |
| Windows XP: 512 MB or more (1 GB or more recommended) |
Interface | USB port |
Other | Mouse or equivalent pointing device |
requirements |
|
|
|
≥Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used.
≥Operation is not guaranteed in the following cases.
jWhen 2 or more USB devices are connected to a PC, or when devices are connected through USB hubs or by using extension cables.
jOperation on an upgraded OS.
jOperation on an OS other than the one
≥This software is not compatible with Microsoft Windows 3.1, Windows 95, Windows 98, Windows 98SE, Windows Me, Windows NT and Windows 2000.
≥The USB equipment operates with the driver installed as standard in the OS.
-79 -
