Attaching the Wire Clamp
CAUTION: Be sure to pull out AC cord from AC outlet before attaching the wire
clamp.
1 Remove two screws holding the wire clamp.
Wire clamp
Two screws
2 Make wires go through the hole of the wire clamp and secure it with screws. (See the Figure 1.)
If diameter of wires is too small to fix by the above method, turn the wire clamp upside down and feed wires through the clamp. Then secure it with screws. (See the Figure 2.)
Wire clamp
Figure1 | Figure 2 |
57 | 55 |
|
|
57
