Acroprint ES900 23. WALL MOUNTING

WALL

23. WALL MOUNTING

Caution: The supplied screws are intended for use on a thick wooden wall or wooden

column. Do not use any other materials. The time clock may come off if used on

other materials.

1Install the supplied wall-mount screws

into a wall by using the template.

Be sure to keep about 6mm (1/4") of

the screw head away from the wall.

The recommended height from the

floor to the bottom of the ES900 is

45".

2Unlock the key and remove the cover.

And then hang it on the wall.

3Replace cover and lock.

WALL

Contents

Main ALL RIGHTS RESERVED 2003 ACROPRINT TIME RECORDER TABLE OF CONTENTS 1. INTRODUCTION & FEATURES F INTRODUCTION: EATURES: Caution: 2. BEFORE USING YOUR RECORDER Print Position on Time Card <Back view> Location of Name <Front view> 3. QUICK EASY SETUP JAN 31 12:00 (Print example) 1 2Remove the PROTECTION PAD. 4Plug the AC cord into the AC outlet 4. OPTIONAL FUNCTIONS External Time Signal for Bell, Built-in Buzzer, and the Slave Clock. External Time Signal and Built-in Buzzer The Slave Clock 5. HOW TO PROGRAM THE TIME RECORDER Program modes Control buttons Function of 3 control buttons 6. SETTING THE TIME 2 3 7. SETTING THE DATE 3 4 2 8. SETTING THE 12/24 HOUR FORMAT 1 2 9. SETTING THE PRINT ORDER 2 Example: Set the print order to "Month, Date, Year, Hour, Minute." Y=Year, M=Month, D=Date, DOW=Day of the week, H=Hour, Min=Minute, S=Second C=Comment, N=Number 10. SETTING YEAR & MINUTE FORMAT 2 4. 3 4 11. SETTING PRE-PROGRAMMED COMMENTS 2 12. SETTING THE CUSTOMIZED COMMENTS 2 4 5 7 8 6 9 12 10 11 13 15 14 HOW TO CORRECT CUSTOMIZED COMMENTS Setting the Print Position of Customized Comments 12 Confirming and Changing the Customized Comments Page 13. SETTING THE LANGUAGE 2 14. SETTING THE PRINT METHOD 2 4. 3 15. SETTING DAYLIGHT SAVING TIME Daylight Saving Time function 1 D.S.T. execution time 2 4 3 Set the starting date. 5 7 6 Set the ending date. 8 3 Deleting the Daylight Saving Time settings 4 16. SETTING THE NUMBER 2 3 4 17. SETTING THE INITIAL NUMBER 2 3 4 18. SETTING THE TIME TABLE PROGRAM 1 Setting program No. 1 I Mark "*" OFF OFF 2 3 Monday to Saturday 4 2 3 Setting program No. 3 6 5 Confirming the Time Table Program settings Deleting the Time Table Program settings 1 2 3 4 19. SETTING THE EXTERNAL TIME SIGNAL / BUILT-IN BUZZER 2 20. SETTING THE SLAVE CLOCK 3 Setting the Slave Clock 21. SETTING THE PASSWORD 2 1 2 3 How to change settings when the Password is set 1 5 Canceling the Password 2 Page WALL 23. WALL MOUNTING WALL 1 2 3 24. REPLACING THE RIBBON CASSETTE 5 6 25. CHARACTER CODE FOR ALPHANUMERIC Large (BOLD) Character Large Character Small Character Language-Specific Character ` ~ 26. INSTALLING THE OPTIONAL Ni-Cd BATTERY 27. CONNECTING THE OPTIONAL FUNCTIONS 1Unlock the key and remove the cover. 3Insert wires into two left terminals for OPTIONAL 4 2 1Unlock the key and remove the cover. 2Insert wires into two right terminals Connecting the External Time Signal Page 28. TROUBLE-SHOOTING Error No. appears 8 OTHER FAILURES 29. SPECIFICATIONS