How to change settings when the Password is set
Once the password is set, you are required to enter the current password before changing any settings.
"9999" will be displayed when you press the [SELECT] button.
1 Press the [SELECT] button, at that moment "9999" is displayed and the first two digits flash.
(The flashing means it can be changed.)
SELECT | CHANGE |
| SET |
Set the first two digits.
In the example, press the [CHANGE] button to set at "12". And then press the [SET] button.
SELECT | CHANGE |
| SET |
2 Set the last two digits.
In case of the example, press the [CHANGE] button to set at "34". Then press the [SET] button.
SELECT | CHANGE |
| SET |
TIME
SELECT | CHANGE |
| SET |
At that moment, the "
" mark indicates the "TIME".
At that moment, the flashing changes to the last two digits.
3 Select desired setting mode by pressing the [SELECT] button.
Then make any changes to settings as explained.
42 | 42 |
|
|
44
