∫To set the White Balance in accordance to the recording scene
1Fill the screen with a white subject or place a white piece of paper in front of the lens.
2Press the W.B. button to display Ach.
≥When the operation icon is displayed and Ach is touched, it will switch to Bch . (l 64)
3Keep on pressing the W.B. button to start the White Balance adjustment.
≥ The screen goes dark momentarily, “WB SET OK” is displayed, and the adjustment ends.
≥When the mode of White Balance is set to something other than Ach/Bch, the Black Balance adjustment is performed by pressing and holding the W.B. button. Setting is completed when the screen goes black momentarily and “BB SET OK” is displayed.
≥When the White Balance/Black Balance cannot be performed, an error message “WB SET NG” or “BB SET NG” is displayed on the screen. In such case, use other mode.
≥The contents previously set are maintained in the Ach/Bch. Perform the setting again when the recording condition has changed.
∫To finely adjust the White Balance
White Balance for the Ach/Bch can be finely adjusted. Perform this after adjusting the White Balance.
≥Switch to Manual Mode. (l 33)
1 Select the menu.
MENU : [CAMERA SETUP] # [COLOR TEMP A ch] or [COLOR TEMP B ch]
2Touch 
/ 
to adjust settings of color.
3Touch [EXIT] to complete the setting.
- 41 -
