Panasonic AG-MX70P manual Installation of MX-Navi, Operation confirmation

Before use

Installation of MX-Navi

After installing the USB driver, install MX-Navi, the software for handling image exchange with the AG-MX70. Follow the steps below.

1)Select “Run…” from the “Start” menu. Click the “Browse” button, select Setup.exe in the MX-Navi folder of the setup CD-ROM, and click “OK.”

5)The installation contents confirmation screen appears.

To proceed with the installation of the contents shown, click the “Next” button. To change the contents, use the “Back” button to return to the previous screen, and change the settings.

2)The setup start screen will be displayed. Click the “Next” button.

6)After the files have been copied, the installation end screen appears. Installation is completed by clicking the “Finish” button now.

3)The screen for setting the MX-Navi installation destination will be displayed. If the destination shown is the one desired, just click the “Next” button.

To change the installation destination, click the “Browse” button, change the installation destination, and click the “Next” button.

Operation confirmation

This completes installation of all of the software. Use the following procedure to confirm that the software has been installed correctly.

1)Confirm that the PC and the AG-MX70 have been connected correctly and that the power of the AG- MX70 is switched on.

2)Select “Programs” > “Panasonic AG-MX70” > “MX- Navi” from the Windows Start menu. MX-Navi will start.

3)When the display column of the status bar on the left bottom of the main window of MX-Navi shows “Connecting,” it means that the software has been installed correctly.

Check that this column

shows “Connecting.”

4)The screen for selecting the installation type is displayed. When “Typical” has been selected, the program files of MX-Navi and sample images are installed. When “compact” has been selected, only the MX-Navi program is installed.

Select the type and click the “Next” button.

<Notes>

If “Not connecting” is shown, check the following.

≥PC and AG-MX70 must be connected correctly.

≥The power of the AG-MX70 must be switched on.

≥The length of the USB cable must be within 3 m.

When a USB hub is being used, correct operation may be obtained when the hub is removed and the cable is connected directly to the USB port of the PC.

79