Parts and their functions
1 2 | 5 7 9 ; | |||||
PREVIEW |
| EFFECTS |
| |||
ME | A |
|
|
|
| |
PRV | PROG |
|
|
|
| |
|
| A |
|
|
| |
|
| PROG |
|
|
| |
| B | STILL | STROBE |
| VIDEO COLOR | |
DSK | EFFECTS EFFECTS | |||||
PRESET |
|
| ||||
|
|
|
| |||
|
| B |
|
|
| |
|
| PRESET |
|
|
| |
|
|
|
|
| MIX EFFECT | |
3 4 | 6 8 : < | |||||
Preview output selection area
The controls in this area are used to determine which images among the transition preview, DSK preview and A/B bus images are to be output from the PREVIEW output connector on the rear panel.
1ME PRV selector button
This button is used to select ME preview as the image to be output to the preview connector. With transitions, the image of the transition destination can be previewed; with keys, combined images can be previewed.
2A/PROG bus selector button
This button is used to select the A/PROG bus as the image to be output to the preview connector.
3B/PRESET bus selector button
This button is used to select the B/PRESET bus as the image to be output to the preview connector.
4DSK selector button
This button is used to select the DSK combined image as the image to be output to the preview connector.
Effect execution button area
5A/PROG bus / STILL execution button
This button forcibly applies the still effect to the A/PROG bus.
When it is pressed, the A/PROG video effect setting page appears on the LCD screen.
6B/PRESET bus / STILL execution button
This button forcibly applies the still effect to the B/PRESET bus.
When it is pressed, the B/PRESET video effect setting page appears on the LCD screen.
7A/PROG bus / STROBE execution button
This button forcibly applies the strobe effect to the A/PROG bus. The setting is performed as a [Video Effects] setting screen.
When the button is pressed, the A/PROG video effect setting page appears on the LCD screen.
8B/PRESET bus / STROBE execution button
This button forcibly applies the strobe effect to the B/PRESET bus.
When the button is pressed, the B/PRESET video effect setting page appears on the LCD screen. The still and strobe field/frame setting is performed using the time effect settings of [Video Effects].
<Note>
Both still and strobe cannot be selected at the same time. Whichever one was selected last takes precedence. In the case of manual strobe, the effect is applied by pressing the button together with “Shift.”
9A/PROG bus / VIDEO EFFECTS execution
button
This applies the mosaic, decay and other video effects set by [Video Effects] to the A/PROG bus.
When the button is pressed, the A/PROG video effect setting page appears on the LCD screen. When it is pressed together with the Shift button, the A/PROG video effect setting page can be displayed on the LCD screen without changing the ON/OFF setting of the effects.
:B/PRESET bus / VIDEO EFFECTS execution
button
This applies the mosaic, decay and other video effects set by [Video Effects] to the B/PRESET bus.
When it is pressed together with the Shift button, the A/PROG video effect setting page can be displayed on the LCD screen without changing the ON/OFF setting of the effects.
;A/PROG bus color effect execution button
This applies the white balance, brightness adjustment and other color effects set by [Color Effects] to the A/PROG bus.
When it is pressed together with the Shift key, the A/PROG color effect setting page can be displayed on the LCD screen without changing the ON/OFF setting of the effects.
<B/PRESET bus / COLOR EFFECTS
execution button
This applies the white balance, brightness adjustment and other color effects set by [Color Effects] to the B/PRESET bus.
When it is pressed together with the Shift key, the B/PRESET color effect setting page can be displayed on the LCD screen without changing the ON/OFF setting of the effects.
<Note>
Both the color effects and mono effects cannot be selected at the same time. If both are selected, the mono effects always take precedence.
8
