REV reverse button, ONE WAY button, MIX button

Parts and their functions

1 2 3

				PATTERN
		ONE	DSK
	REV	WAY	EFFECTS
8	LUM	CHRM EXT		P in P	4
8	LUM	CHRM EXT
	7
	7
	MIX				5
	6				5
	6

1REV (reverse) button

This button is used to reverse the keys and transition key patterns, reverse the frame in/out, and reverse the chroma key, luminance key, external key and title α key signals.

The button’s lamp flashes with patterns that have no reverse operations, indicating that these patterns cannot be reversed.

2ONE WAY button

At the AB bus setting stage, this button sets the transition pattern to a pattern from one direction.

The button’s lamp flashes with preset bus or program bus or with patterns that have no reverse patterns, indicating that the effects cannot be executed.

6MIX button

This is used to call mix transitions.

7LUM (luminance) key button

This is used to call the luminance key. When it is called, the previous setting is stored in the memory.

8CHRM (chroma) key button

This is used to call the chroma key. When it is called, the previous setting is stored in the memory.

3DSK EFFECTS button

When this button is set to the ON position, the transition pattern and 3D-DVE are used for DSK. ME is set to Diss.

When the DSK effects are ON, the chroma key and luminance key cannot be selected.

This button is set to OFF as the default setting, and some patterns cannot be used for the DSK effects.

<Note>

If DSK-Effects has been set to ON for a pattern which is not supported by DSK using a wipe pattern number, the button’s lamp flashes to indicate that DSK effects cannot be applied.

4Direct key pattern buttons

These buttons are used to call the key patterns directly. With the setup initial settings, key patterns can be set from the default settings to any patterns.

The settings accompanying borders are also stored in the memory for each button.

5Direct transition pattern buttons

These buttons are used to directly call the transition patterns directly. With the setup initial settings, transition patterns can be set from the default settings to any patterns.