14
G/L
MIC
PHONE
USB
ADV-REF
PREVIEW
GPI
AUX IN
12
L
R
L
R
AUDIO OUT 2
EDITOR
589 :
1 2 3 4 6 7
MIC input connector
This connector can be set to MIC or AUX 2 on the initial
setting page.
1
2PHONE (headphone) output connector
The headphones are connected to this connector.
3USB interface connector
This connector is used to connect to a personal
computer and download files.
4
5
ADV-REF (advanced reference) output
connector
This connector outputs the reference signal with
advanced vertical phase for source input uses.
8AUX IN (spare) 1 L and R input connectors
AND
9AUX IN (spare) 2 L and R input connectors
These connectors can be used by making a selection on
the initial setting page.
:AUDIO OUT 2 L and R output connectors
These are unbalanced audio output connectors.
G/L (genlock reference) input connectors
These are loop-through, automatically terminated
connectors.
They supply signals to the source VTR or camera and
initiate genlock.
They enable genlock for the G/L input or EXTKEY input
by making a selection on the initial setting page.
6PREVIEW output connector
The signals selected by the preview selector button are
output from this connector.
7GPI input connector
A trigger is applied and a transition is enabled for ME,
DSK or fade as selected on the initial setting page. The
effect is applied 3 frames later.
Parts and their functions
KEY
EXT IN
YB
PR
PIN1 IN2 IN3 IN4 OUT
SDI

EXT IN (external key input area)

SDI (SDI option area)

1 2 3 4 5 6 7 8 9
External key input connector
This connector can be used for key or DSK applications.
It can also be used for genlock signal using the settings
on the initial setting page.
1
2External input Y connector
The cross point EXT or DSK Y signal is input to this
connector.
The DSK source can be set on the DSK/FADE setting
page.
3External input PB connector
The cross point EXT or DSK PB signal is input to this
connector.
9OUT connector
The connectors listed above are used when the optional
board (AG-YA70) has been installed.
4External input PR connector
The cross point EXT or DSK PR signal is input to this
connector.
<Notes>
≥Non-standard signals are not accepted.
≥Since the input signals do not pass through the frame
synchronizers, they must be synchronized with this
unit.
5
6
IN1 connector
IN2 connector
7IN3 connector
8IN4 connector
Rear panel connection area