Panasonic AG-MX70P manual Color Effects setting screen, 00 E 1000 F 3015, Color Effect Gain

[Color Effects] setting screen

Color	Pb 128	Pr 128
Effect	C Gain	0
Event		ME Time	Pattern		INT
00E		10:00F	3015	Blue

Color Effects						ch A
Y Setup	Y Gain		Pb		Pr		C Gain
0		0		128		128	0
R1	R2			R3		R4	R5

This menu is selected using the A or B bus [Color Effects] button. If the status of the [Color Effects] button is not to be changed, press the [Color Effects] button of the bus to be set while holding down the [Shift] key.

Settings can be performed separately for the A bus and B bus. Preview is set to A by pressing the [Color Effects] button for A. Preview is set to B by pressing the [Color Effects] button for B.

The Y setup [–128 to 127] can be set using the rotary 1 control. The default setting is 0.

The Y gain [–128 to 127] can be set using the rotary 2 control (0dB=0). The default setting is 0.

The Pb and Pr color balance can be set using the joystick’s X direction (for adjusting Pb) and rotary 3 control or using the joystick’s Y direction (for adjusting Pr) and rotary 4 control, and the chroma gain can be set using the rotary Z and rotary 5 controls.

At this time, the XYZ display is switched to Pb/Pr/C Gain.

Using transition pattern numbers 200 to 211, 215 to 220 and 222, effects are applied to the B or Preset bus using the settings established for this channel, and the pattern is changed to MIX (56).

<Notes>

≥In the case of pattern numbers 221, 222, 1068 and 1069, color effects can be applied to the B channel and transitions can be initiated. When this is done, the pattern is changed to MIX (56). (With the A bus/B bus)

With the preset bus/program bus, the effects are applied to preset, and they are turned off by setting the reverse button to ON.

≥Color effects cannot be applied to the INT EXT inputs.

23