Panasonic AJ-D910WBP operating instructions Camera SW Mode screen

MAIN Menu Screen 2 of 4 (SUB menus)

CAMERA SW MODE screen

The camera’s switch modes are set on this screen.

¢ C AME R A SW MOD E {

S U P E R V	: F RM 1
F I L T E R I N H	: ON
S HOC K L E S S AWB	: NORMA L
CO L OR B A R	: SMP T E
S . G A I N O F F	: L / M / H
S . I R I S / S . B L K SW : I N H
S . B L K L V L	: ∂1 0
E C U D A T A S A V E	: O F F

Note{

When OFF has been selected for the ECU DATA SAVE item setting, set the unit’s POWER switch to OFF after setting the POWER switch on the AJ-EC3 to the OFF position. If its POWER switch is set to OFF before the POWER switch on the AJ-EC3 is set to the OFF position, the adjust- ments and settings performed when the AJ-EC3 was operated will be saved instead.

FS.BLK is a function which enables the master pedestal to be set lower than the pedestal level. It is used when the black figures displayed on the screen have become lighter due to mist, etc.

Item	Variable	VF	Remarks
	range	display
SUPER V	FRM1	ENG	This selects ON or OFF for SUPER V.
	FRM2		FRM1: Normal mode
			FRM2: Residual image reduction
			mode
FILTER INH	ON	ENG	This switches whether the AWB
	OFF		memory (A and B channels) data is to
			be stored for each filter.
			ON: The data is stored in the A and B
			channel memories (2 memory units)
			only regardless of the filter.
			OFF: The data is stored for each filter.
			(4q2r8 memory units)
SHOCKLESS	OFF	ENG	This selects ON (NORMAL/SLOW/
AWB	NORMAL		FAST) or OFF for shockless AWB.
	SLOW		“Shockless AWB” ensures that a shock
	FAST		will not result when the A, B or PRST
			setting of the WHITE BAL switch is
			changed. FAST (high speed),
			NORMAL (normal speed) or SLOW
			(low speed) can be set as the selection
			time. FAST (approx. 0.5 sec),
			NORMAL (approx. 1 sec),
			SLOW (approx. 3 sec)
COLOR BAR	SMPTE	ENG	This selects the type of color bars.
	SNG		SMPTE: SMPTE color bars
			SNG: SNG (split) color bars
S.GAIN OFF	S.GAIN	ENG	This selects the method used to
	L/M/H		release the super gain mode.
			S.GAIN: The mode is released by the
			super gain switch only.
			L/M/H: The mode is released by
			changing the L/M/H switch setting.
S.IRIS/	S.IRIS	ENG	This allocates the function of the side
S.BLK SW	S.BLK		panel switch.
	INH		S.IRIS: The switch works as a super
			iris function.
			S.BLK: The switch works as a super
			black function.F
			INH: Both the super iris and super
			black functions are inhibited.
S.BLK LVL	p10	ENG	This sets the super black level.
	p20
	p30
ECU DATA SAVE	ON	ENG	ON: The data controlled by ECU is
	OFF		stored in the memory.
			OFF: The data is not stored in the
			memory.

The underlining in the variable range column indicates the setting in the preset mode.

USER menu: The USER menu appears when the MENU switch is set to SET.

ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are held down together.

– 126 –