Setup Card Operations
Setup Card Data Operations
Operations to store setting data on setup cards and read out stored data are performed at the “CARD READ/WRITE” SUB menu page of MAIN menu screen 2 of 4.
Note{
When operating the unit with a remote controller, the CARD READ/WRITE page cannot be oper- ated from the unit.
Formatting setup cards
1 Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP button are held down together.
2
3
4
Press the PAGE button to display the MAIN menu screen 3 of 4.
Press the SHIFT/ITEM button to move the cursor to the “CARD READ/WRITE” position.
Press the UP or DOWN button to open the CARD READ/WRITE page.
¢ C A R D R E A D / WR I T E {
R E A D |
|
S E L E C T | 1 |
WR I T E |
|
S E L E C T | 1 |
C A R D CON F I G |
|
R E A D U S E R D A T A |
|
5
6
Press the SHIFT/ITEM button repeatedly to move the cursor to the CARD CONFIG. position.
A menu shown below appears when the UP (or DOWN) button is pressed.
C A R D R E A D / WR I T E {
R E A D |
|
|
S E L E C T | 1 | |
WR I T E |
|
|
S E L E C T | 1 | |
¢C A R D | CON F I G |
|
R E A D | U S E R D A T A |
|
CON F I G ? ( Y : U P . N : DOWN )
7 Press the UP button to format the set up card. When the setup card has been formatted, the message shown below appears.
Note{
When setup cards are formatted, the setting conditions at that time are also input simulta- neously.
C A R D R E A D / WR I T E {
R E A D |
|
|
S E L E C T | 1 | |
WR I T E |
|
|
S E L E C T | 1 | |
¢C A R D | CON F I G | |
R E A D | U S E R D A T A | |
F ORMA T | O K | |
8 When menu operations have been completed, return the MENU SET/OFF switch to OFF. The setting menu disappears from the viewfinder screen and the displays indicating the unit’s current status appear at the top and bottom of the viewfinder screen.
– 88 –
