Status Displays Inside the Viewfinder Screen
1 Extender display
This is displayed when the lens extender is being used.
2 Shutter speed/mode display
This displays the shutter speed or shutter mode setting.
OFF (OFF is not displayed.):
The shutter is not used.
1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000:
Shutter speeds (seconds) during standard mode.
1/60.8–1/250 (SYNCHRO SCAN):
Synchro scan mode is selected.
SUPER V:High vertical resolution mode is selected.
3 Remaining tape length display
This indicates the remaining tape length (minutes) for the VTR during recording.
Remaining tape length display |
| Remaining tape length display | |||
(25 Mbps) |
|
| (50 Mbps) |
| |
|
|
|
|
| |
Display | Remaining tape |
| Display | Remaining tape | |
length |
| length | |||
|
|
| |||
|
|
|
|
| |
Full to 60 minutes |
| Full to 30 minutes | |||
|
|
|
|
| |
60 to 55 minutes |
| 30 to 25 minutes | |||
|
|
|
|
| |
55 to 50 minutes |
| 25 to 20 minutes | |||
|
|
|
|
| |
50 to 45 minutes |
| 20 to 15 minutes | |||
|
|
|
|
| |
45 to 40 minutes |
| 15 to 10 minutes | |||
|
|
|
|
| |
40 to 35 minutes |
| 10 to 5 minutes | |||
|
|
|
|
| |
35 to 30 minutes |
| 5 to 0 minutes | |||
|
|
|
|
| |
30 to 25 minutes |
|
|
| ||
|
|
|
|
| |
25 to 20 minutes |
|
|
| ||
|
|
|
|
| |
20 to 15 minutes |
|
|
| ||
|
|
|
|
| |
15 to 10 minutes |
|
|
| ||
|
|
|
|
| |
10 to 5 minutes |
|
|
| ||
|
| The | |||
5 to 0 minutes | |||||
less than 2 minutes of tape remaining. | |||||
|
| ||||
4 Remaining battery level display
When an Anton Bauer Digital Magnum Series battery is used to supply power to the unit, the remaining battery level is displayed numerically (%).
Note{
When a Digital Magnum series battery made by Anton Bauer is used to supply external power to the unit near the battery end, the remaining battery level display will show the external voltage, and the unit will be operated by the external power supply.
5
6
7
Filter display
This displays the type of filter selected.
White balance memory display
This displays the selected white balance automatic adjustment memory.
A:The WHITE BAL switch is set to A.
B:The WHITE BAL switch is set to B.
P:The WHITE BAL switch is set to PRST.
Gain value display
This displays the image amplifier gain setting (dB) set by the GAIN switch.
– 58 –
