Panasonic AJ-D910WBP operating instructions Status Displays Inside the Viewfinder Screen, 0dB F5.6

Status Displays Inside the Viewfinder Screen

In addition to images, messages indicating the unit’s settings and operating status appear on the viewfinder screen. The center marker and safety zone marker, etc. are also displayed.

When the MENU SET/OFF switch is set to OFF, items set to SET at the VF DISPLAY page of the setting menu and using related switches appear at the top and bottom of the screen.

Messages informing of the setting contents or of the adjustment course or results can also be displayed for approximately 3 seconds when settings are changed, during the course of adjust- ments, or after adjustments have been completed.

ÁSee “Selecting Display Items” (page 60) for selecting display items, “Display Mode and Setting Change Message” (page 61) for the setting change message, and “Setting the Marker Displays” (page 62) for the marker displays.

The display positions of all items which can be displayed are shown in the figure below.

eExtender display

fShutter speed/mode display g Remaining tape length display h Remaining battery level display i Filter display

j White balance memory display k Gain value display

l Audio level display m Iris value display n Warning display o Safety zone marker p Center marker

q Super iris ON or super black ON display r MARK1/MARK2/TAKE display

s TCG (Time Code Generator) display t Master gain & super gain setting display u 50M display

v Battery setting display

1 2 q 3 s 4

o	EX2 1/250			S	30-25		14.6V		o
							50M		u
t							NiCd12		v
									p
									n
								T_M1
o									r
	1B	A	0dB		- - - - - - -		F5.6		o
5		6	7		8	9

Note{

When in SUPER V mode, “SUP.V” is displayed at shutter speed position f in the Viewfinder screen.

– 57 –