Panasonic AJ-D910WBP operating instructions MIC/AUDIO screen

MAIN Menu Screen 3 of 4 (SUB menus)

MIC/AUDIO screen

The MIC/AUDIO items are set on this screen.

¢ M I C/A U D I O	{
F RON T P OWE R	: ON
F RON T M I C	: ∂4 0 d B
R E A R M I C C H 1	: ∂6 0 d B
R E A R M I C C H 2	: ∂6 0 d B
L I N E C H 1 / C H 2	: µ4 d B
R E A R A U D I O	: S T E R E O

M I C	L OW C U T C H 1 : F RON T
M I C	L OW C U T C H 2 : F RON T
EMP H A S I S		: O F F
L I M I T E R		: O F F
T E S T T ON E		: NORMA L

Note{

ÁThe frequency response when ON is selected for the MIC LOWCUT item setting is 200 Hz to 10 kHz.

Item	Variable	VF	Remarks
	range	display
FRONT POWER	ON	ENG	ON: The phantom power is supplied
	OFF		to the front microphone.
			OFF: The phantom power is not
			supplied to the front microphone.
FRONT MIC	p40/p50/	ENG	This selects the camera mic input
	60 dB		level.
REAR MIC CH1	p40/p50/	ENG	This selects the mic level of the rear
	p60 dB		AUDIO CH1 input jack.
REAR MIC CH2	p40/p50/	ENG	This selects the mic level of the rear
	p60 dB		AUDIO CH2 input jack.
LINE CH1/CH2	o4/0/	ENG	This selects the line input level of the
	p6 dB		rear AUDIO CH1 and CH2 input jacks.
REAR AUDIO	STEREO	ENG	This selects the rear jack AUDIO CH1
	MONO		and CH2 input method.
			STEREO: Stereo input is selected.
			(The CH1 input signals are recorded
			on CH1 and the CH2 input signals are
			recorded on CH2.)
			MONO: Monaural input is selected.
			(The CH1 and CH2 input signals are
			mixed, and the mixed signals are
			recorded on both CH1 and CH2.)
MIC LOWCUT	FRONT	ENG	FRONT: The CH1 input high-pass
CH1	REAR		filter is set to ON only when FRONT is
	F&R		selected.
	OFF		REAR: The CH1 input high-pass filter
			is set to ON only when REAR is
			selected.
			F&R: The CH1 input high-pass filter is
			set to ON regardless of whether
			FRONT or REAR is selected.
			OFF: The CH1 input high-pass filter is
			set to OFF.
MIC LOWCUT	FRONT	ENG	FRONT: The CH2 input high-pass
CH2	REAR		filter is set to ON only when FRONT is
	F&R		selected.
	OFF		REAR: The CH2 input high-pass filter
			is set to ON only when REAR is
			selected.
			F&R: The CH2 input high-pass filter is
			set to ON regardless of whether
			FRONT or REAR is selected.
			OFF: The CH2 input high-pass filter is
			set to OFF.

The underlining in the variable range column indicates the setting in the preset mode.

USER menu: The USER menu appears when the MENU switch is set to SET.

ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are held down together.

– 134 –