Controls and Their Functions
Ã
Õ
Œ
»
√ | ≈ ∆« ƒ |
| ( ( ( |
| – œœ |
| ) ) ) |
Menu Operation Section
ÃSetup card insertion slot
The optional setup cards are inserted into this slot.
ÄMENU SET/OFF switch
This displays the setting menu on the viewfinder screen through VIDEO OUT connector. SET: The page on which the previous setting menu operations were completed appears on
the viewfinder screen. (When the menu is used for the first time, the first of the pages which can be displayed appears.)
OFF: The setting menu is not displayed on the viewfinder screen through VIDEO OUT con- nector.
ÅSHIFT/ITEM button
Each time this button is pressed, the cursor moves on the setting menu page now displayed. Use it when selecting items.
Note{
This switch functions differently depending on the operation item. Check the function by oper- ating the menu item by item.
ÆUP button
This is used to increment the setting of the item selected on the setting menu by 1 level each time it is pressed or to switch the setting between ON and OFF.
ÇDOWN button
This is used to decrement the setting of the item selected on the setting menu by 1 level each time it is pressed or to switch the setting between ON and OFF.
ÈPAGE button
This is used to select the setting menu page.
Time Code-Related Section (1)
ÉGENLOCK IN/(VIDEO IN) connector (BNC)
The reference signal is supplied to this connector when the camera section is to be subject to genlock operation or when the time code is to be locked externally. This connector serves as an external video input connector when REC SIGNAL: VIDEO has been selected on the setting menu.
– 20 –
