Adjusting the Viewfinder (The viewfinder shown in the illustration is the optional
Mounting the Viewfinder
1 Press down the viewfinder.
2 Tighten the viewfinder stopper screw firmly. If it is difficult to insert the screw, press down the viewfinder once again.
3 Connect the plug to the viewfinder connector and secure the viewfinder cable with the clamp.
Note{
Insert the plug firmly when connecting it to the viewfinder connector.
Stopper Screw
Detaching the Viewfinder
1
2
3
Check that the POWER switch is set to OFF.
Disconnect the plug from the viewfinder cable connector.
Note{
Use both hands to detach the viewfinder. The viewfinder may not detach smoothly with one hand, resulting in damage to the viewfinder.
Loosen the viewfinder stopper screw and detach the viewfinder by pulling it straight up.
Pull straight up.
Stopper Screw
Hook your fingers here.
– 37 –
