Panasonic AJ-D910WBP operating instructions REC ASPECT/PB/RET screen

MAIN Menu Screen 3 of 4 (SUB menus)

REC (ASPECT)/PB/RET screen

The recording, playback and return functions are set on this screen.

¢ R E C ( A S P E C T ) / P B / R E T {
R E C S I GN A L	: C AM
R E C MOD E	:	4 E 3 / 5 0 M
P B MOD E	: A U T O
R E T SW	:	R E C C H E C K

Item	Variable	VF	Remarks
	range	display
REC SIGNAL	CAM	USER	This selects the video input signals.
	VIDEO	ENG	CAM: Signals input from the camera.
			VIDEO: Signals input from the
			GENLOCK IN connector.
			FEven when VIDEO has been selected as
			the REC.SIGNAL item setting, the setting
			will revert to CAM when the power is
			turned off and then turned back on.
REC MODE	16E9/50M	ENG	This selects the mode for recording on
			the VTR.
	4E3/50M		16E9/50M: (16:9) signals are recorded
			using the 50 Mbps format.
	16E9/25M		4E3/50M: (4:3) signals are recorded
			using the 50 Mbps format.
	4E3/25M		16E9/25M: (16:9) signals are recorded
			using the 25 Mbps format.
			4E3/25M: (4:3) signals are recorded
			using the 25 Mbps format.
PB MODE	AUTO	USER	This selects the playback mode.
	50M	ENG	AUTO: Mode in which the tape is
	25M		played back after the recording mode
			is detected automatically.
			50M: The tape is played back in the
			50M mode.
			25M: The tape is played back in the
			25M mode.
RET SW	REC	USER	This selects the RET switch function.
	CHECK	ENG	REC CHECK: The REC CHECK
	CAM		operation is performed.
	RET		CAM RET: The return signal output
	MARKF		operation is performed.
			(MARK): The MARK switch operation
			is performed.

FThis is displayed when the Picture Link adaptor board (AJ-YAP900, optional acces- sory) has been installed.

The underlining in the variable range column indicates the setting in the preset mode.

USER menu: The USER menu appears when the MENU switch is set to SET.

ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are held down together.

– 133 –