Basic operations (Continued)

Operation of the camera recorder1)Operation of the display interlocking switch

Select the white balance settings by using the PRE/A/B button and monitoring the PRE/A/B display.

The state of the camera recorder filter is displayed on the CC/ND display.

If two filters are installed on the camera recorder, it is impossible to switch the filters from the unit but it is possible to switch the display by using the FILTER ND/CC button. The ND filter is indicated with numerical values while the CC filter is indicated with letters of the alphabet.

The gain will change when using the two buttons of the M.GAIN3 button and M.GAIN4 button and monitoring the GAIN display. However, if super gain is set to ON in the USER switch, operations of the MGAIN button are disabled.

2)Operation of the USER switch

The USER MAIN/USER1/USER2 switch functions the same as the USER switch on the camera recorder. Functions of the USER switch can be set and confirmed on the camera menu or the USER-SW item on the unit menu.

3)Operation of the ABB/AWB/BAR switch

The ABB button and the AWB button function the same as the switch for the white balance/ black balance of the camera recorder.

The lamp is on when the unit is operated. If the button is pressed again during operation, the lamp will flash for 5 seconds to indicate an interruption of the operation.

If “PRE” is selected in the PRE/A/B selection of the white balance, it is impossible to change the setting, and the lamp will flash for 5 seconds.

The BAR button switches the camera output to the color bar. The lamp is on when the camera output outputs the color bar.

4)Operation of other switches

For the MATRIX ON button, the DTL OFF button, A.KNEE ON button, HIGH COLOR ON button, and the SHT ON button, the ON and OFF states switch every time the button is pressed. The lamp for the DTL OFF button is on when the button is OFF. The lamps for the other buttons are on when the button is on.

E-17