Parts and functions (Continued)

Camera recorder/Scene file operation!3" REW/1 button

!1" !2" !3" !4" !5" !6" !7" !8"

H

In recorder mode:

This button is operated in the same way as the REW button on the camera recorder, and the lamp is on when a tape is rewinding.

In the scene file mode:1 is selected as the number for the scene file to be saved or loaded.

!9"

!1" RECORDER ENABLE buttonFor switching between the recorder mode and the scene file mode

When the lamp is on:

Recorder modeButtons from !3" to !8" are operated as control buttons for the recording.

When the lamp is off:

Scene file mode

Buttons from !3" to !8" are operated as the buttons for reading and storing scene files. When the power is turned on, the unit is in this state.

!2" REC.INH/LOAD button

In recorder mode:

When the lamp is on, the REC S/S button !8" is inhibited.

However, even if the unit is in the recording inhibition state, operation of the USER button assigned REC function and operation of the REC button on the camera recorder are enabled.

The lamp is off when the power is on.In scene file mode:

The button is operated as the LOAD switch of the scene file. Data are retrieved from the file on the remote controller.

!4" FF/2 button

In recorder mode:

This button is operated in the same way as the FF button on the camera recorder, and the lamp is on when a tape is fast- forwarding.

In scene file mode:

2 is selected as the number for the scene file to be saved or loaded.!5" STOP/3-button

In recorder mode:

This button is operated in the same way as the STOP button on the camera recorder, and the lamp is on when a tape stops.

In scene file mode:

3 is selected as the number for the scene file to be saved or loaded.!6" PLAY/4-button

In recorder mode:

This button is operated in the same way as the PLAY button on the camera recorder, and the lamp is on when a tape is replayed. If the button is pressed again during tape replay, it changes to replay/pause, and the lamp flashes.

If the button is pressed one more time, the unit returns to replaying, and the lamp is on continuously.

In scene file mode:

4 is selected as the number for the scene file to be saved or loaded.

E-7