When the indication “CARD-DEL” is displayed on the LCD panel together with the file number displayed under the indication, turn the Rotary Encoder 1 to select the file to be deleted.

Saving/Loading of scene files onto the SD memory card (Continued)

ENGLISH

To write data on the card

1 Select “SYSTEM” using the SHUTTER/ SYSTEM button, and display the menu on the second layer using the 4button.

2 When the indication “CARD-WR” is displayed on the LCD panel together with the file number displayed under the indication, turn the Rotary Encoder 1 to select the file.

<Note>

If the file already exists, the title is displayed under the TITLE indication. Be careful and do not overwrite the file.

3 When the cursor for entering the title is displayed on the LCD panel, turn the Rotary Encoder 3 to select the letters and turn the Rotary Encoder 2 to move the cursor.

Up to eight letters can be entered. Once the eighth letter is entered, the last letter will flash.

4 When the Rotary Encoder 3 is pressed, the indication “NO?” is displayed on the LCD panel. Turn the Rotary Encoder to select the indication “YES?” and start writing data by pressing the Rotary Encoder 3 again.

5 When the writing operation starts, the SD card access lamp is on and the indication “ACTIVE” is displayed on the LCD panel.

6 When the writing of the data is finished, the SD memory card access lamp turns off, and the indication “OK” is displayed on the LCD panel.

To delete files from the card

1 Select “SYSTEM” using the SHUTTER/ SYSTEM button, and display the menu on the third layer using the 4button.

2

3 When the Rotary Encoder 3 is pressed, the indication “NO?” is displayed on the LCD panel. Turn the Rotary Encoder 3 to select the indication “YES?” and start deleting data by pressing the Rotary Encoder 3 again.

4 When the deleting operation starts, the SD card access lamp is on, and the indication “ACTIVE” is displayed on the LCD panel.

5 When the deletion of the data is finished, the SD memory card access lamp turns off, and the indication “OK” is displayed on the LCD panel.

Initialization of the card

1 Select “SYSTEM” using the SHUTTER/ SYSTEM button, and display the menu on the fourth layer using the 4button.

The indication “EXEC” is displayed.

2 When the Rotary Encoder 3 is pressed, the indication “NO?” is displayed on the LCD panel. Turn the Rotary Encoder 3 to select the indication “YES?” and start the initialization by pressing the Rotary Encoder 3 again.

The following procedures are the same as procedures 4 and 5 for deleting files from the card.

E-22