Basic operation (Continued)
When the volume operation is enabled, the unit operates in the absolute value mode where the value is fixed in accordance with the position of the volume. The value will be “0” by clicking the center.
The variable amount is within a range between the minimum value of
The unit has five sets of scene files and is capable to storing the current settings as a scene file or loading the stored settings.
It is also possible to store/call scene files using the SD memory card. For details, refer to “Saving/Loading of scene files onto the SD memory card” (page 21).
1)Operation of the scene fileWhen the lamp of the RECORDER ENABLE button is off, the scene files are operated using the seven buttons on the top right side of the unit.
Storing: Select a file number to store using buttons 1 to 5 (blue letters). When the button is pressed, the button lamp will flash. If the SAVE (blue letters) button is pressed in this state, the SAVE button lamp will also flash. To store the file, press the SAVE button again. When the store operation is finished, the lamp of the button for the stored file number turns on.
When the lamps for buttons 1 to 5 are flashing, press the button or leave for 10 seconds or more to release the selection.
Loading: Select a file number to load using buttons 1 to 5 (blue letters). When the button is pressed, the button lamp will flash. If the LOAD button is pressed in this state, the selected file will load. At this time, the lamp of the VR ACTIVE button flashes, the operation mode of the volume set in the unit menu is ignored, and the unit is in the relative value mode.