Panasonic AJ- G Menu item, Menu, BLACK, ENGLISH, is the factory setting mode, ŠGAIN-VR-MODEand GAIN-VR-RANGEin “WHITE”, ŠBUZZER, LCD CONTRAST, and SW BRIGHT in “SYSTEM”

Menu item

ENGLISH

Menu

The menu items on the unit may vary with the camera recorder connected to the unit.

For the following menu items, the factory settings for the unit only are set separately from the camera recorder.

ŠBLACK-VR-CONTROL, BLACK-VR- MODE, and BLACK-VR-RANGE in “BLACK”ŠGAIN-VR-MODE and GAIN-VR-RANGE in “WHITE”ŠBUZZER, LCD CONTRAST, and SW BRIGHT in “SYSTEM”

When the column of “Storage” in the menu table is answered with “Yes”, the settings for the relevant items can be stored on the unit or the SD memory card as a scene file. For details, refer to “Operation of the scene file” (page 19) and “Saving/Loading of scene files onto the SD memory card” (page 21).

BLACK

Layer	Item	Variable	Contents description		Storage
		range
1	RPED	–100	To set the pedestal for		Yes
		:	Rch
		+100
	GPED	–100	To set the pedestal for		Yes
		:	Gch
		+100
	BPED	–100	To set the pedestal for		Yes
		:	Bch
		+100
2	BLACK-VR-	FLR	To select the items to be
	CONTROL	PED	adjusted using the		Yes
			BLACK volume
			FLR: FLARE
			PED: PEDESTAL
3	BLACK-VR-	ABS	To select whether the
	MODE	REL	BLACK volume of the
			RGB is operated using		Yes
			the absolute value or
			the relative value
			ABS: Absolute value
			REL: Relative value
4	BLACK-VR-	MIN	To switch the variable
	RANGE	NORM	range of the BLACK
		MAX	volume of RGB		Yes
			MIN:	n25
			NORM:	n50
			MAX:	n100

<Note>

When “PED” is selected in the BLACK-VR-CONTROL and the lamp of the VR ACTIVE button is on or “ABS” (absolute value) is selected in the BLACK-VR-MODE item, it is impossible to adjust the PRED/GPEG/BPEG items using the rotary encoder. Adjust these items using the BLACK volume.

is the factory setting mode.

E-24