Parts and functions (Continued)

!7" CHECK/5-button

In recorder mode:

This is the recording confirmation button. If the button is pressed when recording is paused, the recording can be checked. The lamp flashes when the tape is rewound and is turned on when the tape is replayed.

In scene file mode:

5 is selected as the number for the scene file to be saved or loaded.

!8" REC S/S / SAVE button

In recorder mode:

This is the start/stop button for recording. This button is operated in the same way as the REC START button on the camera recorder, and the lamp is on during recording.

In scene file mode:

This button is operated in the same way as the SAVE button for scene data.

The current data are stored in the file on the remote controller, which is selected by using the buttons from !3" to !7".

!9" RECORDER WARNING lamp

This lamp flashes or is turned on when an error occurs on the camera recorder, just like the WARNING lamp on the camera recorder. For details, refer to the operation manual of the camera recorder.

ENGLISH

E-8