Saving/Loading of scene files onto the SD memory card
It is possible to store up to 8 sets of settings for the unit.
While data on the card are read or written, any operation of the unit panel is inhibited. Insert the SD memory card into the SD memory card slot on the unit and operate the unit menu.
<Notes>
zUse an SD memory card with a capacity of 8 MB or more. The maximum capacity of an SD card that can be used on the unit is 2 GB.
zThe SD memory card must be formatted on the unit.
Handling methods for the SD memory cardEnsure that the SD memory card is inserted or ejected in the proper direction.
SD memory card slot
When the SD memory card is used for the first time, execute CARD CONFIG in SYSTEM on the unit menu.
<Note>
While data are being stored on the SD memory card or data are being loaded from the SD memory card, do not remove the SD memory card. Otherwise, data on the SD memory card may be damaged.
1 When “SYSTEM” is selected using the SHUTTER/SYSTEM button, the indication
2 Select the file to read out by changing the numerical value in the Rotary Encoder 1. If there is no applicable file, the indication “NO FILE” is displayed on the LCD panel.
3 Press the Rotary Encoder 3.
When the indication “READ NO?” is displayed on the LCD panel, turn the Rotary Encoder 3 to select “YES?” and press the Rotary Encoder 3 again to start reading out the data.
4 The read operation starts and the indication “ACTIVE” is displayed on the LCD panel. While the data are loaded, the SD memory card access lamp is on.
SD memory card access lamp
5 When the reading the data is finished, the SD memory card access lamp turns off and the indication “OK” is displayed on the LCD panel.
<Note>
If the data cannot be read properly, the indication “READ NG” is displayed on the LCD panel. Execute the load operation again. If the load operation is not executed properly, replace the SD memory card with a new one.