Panasonic AJ-HDX900 (continued), 7-2-3OUTPUT SEL, 7-2-4VIDEO OUT SETTING

Chapter 7 Menu description tables (continued)

7-2-3 OUTPUT SEL

Item		Variable		Remarks
		range
OUTPUT ITEM		TC	For setting the characters superimposed on
		STATUS	the output signals from the VIDEO OUT
		MENU	connector.
		ONLY	TC:
			Time codes are superimposed (when the
			menu is accessed, the menu screen is
			superimposed.)
			STATUS:
			The characters that are the same as the
			characters	superimposed in the
			viewfinder	screen are superimposed.
			(When the menu is accessed, the menu
			screen is superimposed.)
			MENU ONLY:
			The menu screen is superimposed only
			when the menu is accessed. This
			normally displays nothing.
			For details, refer to “4-8-1 Settings of signals
C U F			output from VIDEO OUT connector.”
MONI OUT	HD-SDI		For setting video signals output from the
		HD-Y	MON OUT connector.
			HD-SDI:
			For outputting the HD SDI signals
			HD-Y:
			For outputting the analog HD-Y signals
			For details, refer to “4-8-2 Settings of signals
C U F			output from MON OUT connector.”
MONI OUT CHARA	ON		For superimposing characters on the HD
		OFF	SDI output signals from the MON OUT
			connector.
			ON: To superimpose
			OFF: Not to superimpose
			<Note>
			This does not link with the VIDEO OUT
C U F			CHARACTER switch.
MONI OUT MODE	CAM		For switching the signals output from the
		VTR	MON OUT connector.
			CAM: The camera images are output at all
			times.
			VTR: In the recording or other EE mode,
			camera images are output from the
			connector; in playback mode, the
C U F			VTR’s playback signals are output.
VF MODE		CAM	For switching the display mode of the
		VTR	viewfinder screen.
			CAM: The camera images are output at all
			times.
			VTR: In the recording or other EE mode,
			camera images are displayed; in
			playback mode, the VTR’s playback
C U F			images are displayed.

The underlining in the variable range column indicates the setting in the preset mode.

7-2-4 VIDEO OUT SETTING

Item	Variable			Remarks
	range
VIDEO OUT	OFF	For setting the center marker to be
CENTR MARK	1	superimposed on the output signals of the
	2	VIDEO OUT connector.
	3	OFF: The center marker is not displayed.
	4	1:	+ (large)
		2:	Center blank (large)
		3:	+ (small)
C U F R		4:	Center blank (small)
VIDEO OUT	OFF	For setting the type of safety marker frame
SAFETY MARK	1	to be superimposed on the output signals of
	2	the VIDEO OUT connector.
		OFF: The safety marker frame is not
			displayed.
		1:	Box
					7
		2:
			Corner frames
C U F R
SAFETY AREA	80%	For setting the size of the safety marker.
	:	It is possible to set the size by units of 1%
	90%
		with a fixed ratio between of width and
	:
C U F R	100%	height.
VIDEO OUT FRM	ON	For superimposing the frame marker on the
MARK	OFF	output signals from the VIDEO OUT
		connector.
		ON: To superimpose
C U F R		OFF: Not to superimpose
FRM SIG	4:3	For setting the frame marker.
	13:9	The VISTA setting is 16:8.65.
	14:9
C U F R	VISTA
VIDEO OUT USER	ON	For superimposing the user box on the
BOX	OFF	output signals from the VIDEO OUT
		connector.
		ON: To superimpose
		OFF: Not to superimpose
		O It is not superimposed when the VIDEO
			OUT switch is set to the SD-SDI or VBS
C U F R			position.
USER BOX WIDTH	1	For setting the horizontal width of the user
	:	box.
	13
	:
C U F R	100
USER BOX	1	For setting the vertical height of the user
HEIGHT	:	box.
	13
	:
C U F R	100
USER BOX H POS	–50	For setting the horizontal position of the user
	:	box center.
	+00
	:
C U F R	+50
USER BOX V POS	–50	For setting the vertical position of the user
	:	box center.
	+00
	:
C U F R	+50

O The user box can be displayed in any position as a box- type cursor.

O When the DOWNCON MODE item on the DOWNCON SETTING screen is set to LT-BOX or S-CROP, the frame marker and the safety marker are not displayed.

103