Panasonic AJ-HDX900 GPS, TAPE, BATT, RF SERVO HUMID SLACK, Time code-relatedswitch settings and display items

Chapter 2 Parts and their functions (continued)

Mode displays

GPS: Lights when signals cannot be received during GPS operation.

GPS : Lights when signals are being received during GPS operation.

P-REC:Lights in pre-recording mode and flashes during the time set for pre-recording after the tally lamp for recording has turned off.

iREC: Lights during recording when the interval recording mode is established; flashes during recording standby.

i:Flashes when the interval recording mode has been selected.

NDF SLAVE HOLD					GPS			0		OVER
CTL VTCG TIME DATE P-iREC
	h Y		minM	s D	frm
								10
								20
TAPE
		E				B		30
BATT
		E				F		40
									OO
RF SERVO HUMID SLACK							13 -dB24

Displays relating to the time code

NDF: Lights when the time code is in the non-drop frame mode.

DF: Lights when the time code is in the drop frame mode.

SLAVE: Lights when the time code is locked externally.

HOLD: Lights when the time generator/reader value is being held.

CTL: Lights when CTL is selected by the DISPLAY switch and the CTL count value is displayed.

TCG: Lights when TC (or UB) is selected by the DISPLAY switch and the TC (or UB) generator value is displayed.

TC: Lights when TC (or UB) is selected by the DISPLAY switch

and the TC (or UB) reader value is displayed.

VTCG: Lights when UB is selected by the DISPLAY switch and the VIUB generator value is displayed.

VTC: Lights when UB is selected by the DISPLAY switch and the VIUB reader value is displayed.

TIME: Lights when UB is selected by the DISPLAY switch and the values of the hour, minutes and seconds in real time are displayed.

DATE: Lights when UB is selected by the DISPLAY switch and the values of the year, month and day are displayed in real time.

No display: Remains off when UB is selected by the DISPLAY switch and the real-time values of the hour and minutes in the time zone are displayed.

Time counter display:

The time code, CTL, user bits and real time are displayed.

<Note>

When UB has been selected by the DISPLAY switch, each time the HOLD button is pressed, the setting is switched in the following sequence: VTCG (VTC) 5 DATE 5 TIME 5 no display (time zone) 5 TCG (TC) and so on repeatedly.

Time code-related switch settings and display items

TCG switch position	DISPLAY switch	Display item
	position
	TC or CTL	Time code
SET
	UB	User bits
	CTL	CTL
F-RUN or R-RUN
	TC	Time code
	UB	User bits

20