Panasonic AJ-HDX900 (continued), 4-8-2Settings of signals output from MON OUT connector

Chapter 4 Adjustments and settings for recording (continued)

4-8-2 Settings of signals output from MON OUT connector

Set the video signals output from the MON OUT connector by using the MONI OUT item on the menu (<OUTPUT SEL> screen on the SYSTEM SETTING page).

The HD-Y signals can be used for applying GEN LOCK to other devices. It is impossible to superimpose markers and characters on the HD-Y signals.

Even when the tape is replayed, images from the camera are output.

Item	Variable	Remarks
	range
MONI OUT	HD-SDI	Set video signals output from the MON OUT
	HD-Y	connector.
		HD-SDI:For outputting the HD SDI signals
		HD-Y:For outputting the analog HD-Y
		signals

Set to superimpose characters to the HD SDI signals output from the MON OUT connector in the MONI OUT CHARA item of the menu (<OUTPUT SEL> screen on the SYSTEM SETTING page).

Item	Variable	Remarks
	range
MONI OUT CHARA	ON	Superimpose characters on the HD SDI
	OFF	output signals from the MON OUT
		connector.
		ON: To superimpose
		OFF: Not to superimpose
		<Note>
		This does not link with the VIDEO OUT
		CHARACTER switch.

Switch the signals output from the MON OUT connector by using MONI OUT MODE item on the menu (<OUTPUT SEL> screen on the SYSTEM SETTING page).

Item	Variable	Remarks
	range
MONI OUT MODE	CAM	Switch the signals output from the MON
	VTR	OUT connector.
		CAM: The camera images are output at all
		times.
		VTR: In the recording or other EE mode,
		camera images are output from the
		connector; in playback mode, the
		VTR’s playback signals are output.

Set the marker and user boxes to superimpose on the output signals from the MON OUT connector by using the respective items on the <MONITOR OUT SETTING> screen (SYSTEM SETTING page) of the menu.

Item	Variable			Remarks
	range
MONI OUT CENTR	OFF	For setting the center marker to be
MARK	1	superimposed on the HD SDI output signals
	2	of the MON OUT connector.
	3	OFF: The center marker is not displayed.
	4	1:	+ (large)
		2:	Center blank (large)
		3:	+ (small)
		4:	Center blank (small)
MONI OUT	OFF	For setting the type of the safety marker
SAFETY MARK	1	frame to be superimposed on the HD SDI
	2	output signals of the MON OUT connector.
		OFF: The safety marker frame is not
			displayed.
		1:	Box
		2:
			Corner frames
SAFETY AREA	80%	For setting the size of the safety marker.
	:	It is possible to set the size by units of 1%
	90%
		with a fixed ratio between of width and
	:
	100%	height.
MONI OUT FRM	ON	For superimposing the frame marker on the
MARK	OFF	HD SDI output signals from the MON OUT
		connector.
		ON: To superimpose
		OFF: Not to superimpose
FRM SIG	4:3	For setting the frame marker.
	13:9	The VISTA setting is 16:8.65.
	14:9
	VISTA
MONI OUT USER	ON	For superimposing the user box on the HD
BOX	OFF	SDI output signals from the MON OUT
		connector.
		ON: To superimpose
		OFF: Not to superimpose
USER BOX WIDTH	1	For setting the horizontal width of the user
	:	box.
	13
	:
	100
USER BOX	1	For setting the vertical height of the user
HEIGHT	:	box.
	13
	:
	100
USER BOX H POS	–50	For setting the horizontal position of the user
	:	box center.
	+00
	:
	+50
USER BOX V POS	–50	For setting the vertical position of the user
	:	box center.
	+00
	:
	+50

O The user box can be displayed in any position as a box- type cursor.

60