Panasonic AJ-HDX900 7-4VF, (continued), 7-4-1VF DISPLAY

Chapter 7 Menu description tables (continued)

7-4 VF7-4-1 VF DISPLAY

Item	Variable		Remarks
	range
DISP CONDITION	NORMAL	NORMAL:
	HOLD		The statuses are displayed at all times.
		HOLD:
			The statuses are displayed only when the
C U F R			MODE CHECK switch is pressed.
DISP MODE	1	For setting the display mode.
	2	This sets what is displayed in the viewfinder
	3	screen when the state of the unit is changed.
		For details, refer to “4-7-4 Display modes
		and setting changes/ adjustment result
C U F R		messages.”
VF OUT	Y	For selecting the video signals to display in
	NAM	the viewfinder screen.
	R	Y:	Luminance signal
	G	NAM: The signal with the highest level
	B		among the R, G and B signals is
			output.
		R:	R channel signal
		G:	G channel signal
C U F R		B:	B channel signal
VF DTL	0	For setting the detail level of the viewfinder
	:	screen.
	5
		If it is set to “0”, it has the same detail as the
		main line system signals.
		If it is set to “5”, it has about double of details
C U F R		of the main line system signals.
ZEBRA1 DETECT	0%	For setting the ZEBRA1 detection level (IRE
	:	level).
	70%
	:
C U F R	109%
ZEBRA2 DETECT	0%	For setting the ZEBRA2 detection level (IRE
	:	level).
	85%
	:
C U F R	109%
ZEBRA2	ON	For selecting ON or OFF for ZEBRA2 or
	SPOT	selecting SPOT.
C U F R	OFF
LOW LIGHT LVL	OFF	For setting how much lower the camera’s
	10%	input light quantity should be in order for
	15%	“LOW LIGHT” to be displayed.
	20%
	25%
	30%
C U F R	35%
RC MENU DISP.	ON	For the setting to display the menu in the
	OFF	viewfinder screen when the remote control
C U F R		unit is connected to the unit.
MARKER/	50%	For setting the brightness of markers and
CHAR LVL	60%	characters in the viewfinder screen.
	70%
	80%
	90%
C U F R	100%

7

Zebra pattern display

Video level	ZEBRA 2
ON	OFF	SPOT
109%

ZEBRA 2

DETECT

ZEBRA 1

DETECT

0%

The underlining in the variable range column indicates the setting in the preset mode.

115