Panasonic AK-HC1800N operating instructions Interface cable specifications

Major operating controls and their functions

Use the multi-cable provided with the AK-HRP150G when supplying power from the AK‑HRP150G.

Use the cable provided with the AW-PH650 when supplying power from the AW-PH650.

When supplying power from the AW-PH400, use the AW-CA15H29G or the AW‑CAK4H1G cable kit depending on the configuration of the control system.

Use the AW-CA15H29G when supplying power from the AW-PH405.

When supplying power separately, ensure that the specifications of the interface cable given below are satisfied.

Interface cable specifications

Use a cable with a performance equivalent or superior to the specifications given below.

AK-HC1800N

(High-density D-sub 15-pin connector)

G/L GND

GND

DC power supply input

(+12 V)

Not used

Not used

G/L signal input

Not used

GND

DC GND

TX_N(EIA422)/

TXD(EIA232C) output

GND

TX_P(EIA422) output

RX_N(EIA422)/

RXD(EIA232C) input

GND

RX_P(EIA422) input

DC GND

DC power supply input

(+12 V)

Power input: +12 V ±10 %, 5 A or more

Cable length: 5 m or less

G/L GND

G/L signal input

GND

RX_N(EIA422)/

RXD(EIA232C) input

RX_P(EIA422) input

TX_N(EIA422)/

TXD(EIA232C) output

TX_P(EIA422) output

Connector: DHW10-153F200		 Use a twisted-pair cable.
	made by Advanced Connectek Inc.
Cover:	DE-C8-J9-F5-1R
	made by Japan Aviation Electronics Industry, Ltd.

- 11 -