Flare 000 to, Flare OFF, on | Panasonic AK-HC1800N specification

Setting of menu items

MAINTENANCE menu

[3]FLARE

R FLARE [000 to 100]

G FLARE [000 to 100]

B FLARE [000 to 100]

For adjusting the flare correction.

FLARE [OFF, ON]

For turning the flare correction ON or OFF.

- 32 -

Image 32

Panasonic AK-HC1800N operating instructions Flare 000 to, Flare OFF, on

Contents

Operating Instructions Multi Purpose Camera FCC Note Do not Open Indicates safety information Important Safety Instructions Contents Accessories Characteristics Bit A/D conversion and brand-new DSP featuredIntroduction New 2/3˝ 2.2 million-pixel CCD is employed H  Precautions for use DON’TS Front view Bottom view Rear view  Lens mount  HD SDI output connector HD SDI OUT Interface cable specifications AK-HC1800N  Tally output connector Tally OUT How to install How to set the lens How to set up the system Configuration example 1 Connection of camera controller Configuration example 2 High-speed P/T system Configuration example 3 High-speed P/T system AW-PH650 Control exercised from the AW-CB400 BAR Procedure for camera menu operation AW-RP655 When the LCD panel is in the pedestal adjustment mode Mode How to set up the system Operation procedure Adjust the white balanceAdjust the black balance Start shooting How to adjust Flange back adjustment for zoom lensLens iris gain volume adjustment Auto iris power zoom lens White balance adjustment Color temperature and white balance adjustment reference Black balance adjustment Gen-lock adjustment Intelligent functions Automatic video level adjustment method Automatic color temperature adjustment method Setting of menu items How to display the menus Using AK-HRP150G camera controller TOP menu Correctdig OFF, on  Maintenance menuBlack Shading Detection PEDESTAL, Gamma Pedestal -200 to +200Pedestal -100 to +100 Gamma Gamma OFF, on Black Gamma OFF, onDRS OFF, on Cine Gamma Select Video REC, Film REC Flare OFF, on FlareFlare 000 to KNEE, White Clip When the Knee is set to Manual Knee PointKnee Point -25.00% to +25.00% Knee Slope Knee Level 100% to 109% KNEE, White Clip Knee OFF, MANUAL, AutoWhite Clip OFF, on High Color OFF, on Detail Detail OFF, on Knee Aperture OFF, on Detail Slim Detail OFF, on Detail Source Skin Tone Detail Skin Tone DTL OFF, on Skin GET OFF, on Iris Mode LENS, CAM GAIN, Auto IrisIris Level 000 to Iris PEAK/AVE 000 to Mode S.GAIN1, S.GAIN2, S.GAIN3 Super Gain 35 to 0.75 DRS OFF -10 to +10 DRS on PED Offset -200 to +200 Frame Mode Matrix Matrix Table A, B SAT/PHASE -63 to +63 Color Correction Setting menu Lighting TUNGSTEN, DaylightGain Select LOW, MID, HIGH, S.GAIN1 to Matrix Table OFF, A, B Color Correction OFF, onDigital Extender OFF BAR SEL Format Status OFF, onAWB Active AWB OK ABB OK OUT Range RGBMenu on BAR OFF, on Menu SEL Video MENU, Film Menu Shutter Shutter Mode OFF, ON, Synchro Shutter Speed PHASE-COARSE -060 to +060 PHASE-FINE -045 to +045SD-HD Phase CRS -4 to +4 SD-HD Phase Fine -99 to +99 Protocol Protocol 1 to INTELLIGENT1 Gain -6dB to 72dBND-FIL CLEAR, 1/4, 1/16, 1/64 Intelligent MANUAL, AUTO, Lock AGC ATW INTELLIGENT1 Intelligent Mode AGC, ATW, AGC+ATW ND Filter SelectCLEAR, 1/4, 1/16, 1/64, Auto AGC Speed 1 to INTELLIGENT1 AGC Gain Step NORMAL, MAX HI Light Detect 01 to ATW Speed 1 to Iris Range 1, 2ATW Area 25%, 50%, 90% AGC Mode NORMAL, SPORTS, SN, User The AGC control mode is set here MIX +00dB, +06dB Frame MIX INTELLIGENT1 SUB Menu INTELLIGENT2 Intelligent SET INTELLIGENT2 ATW Width 1 to Iris on Lock LOCK, MANUAL, Panel Camera ID menu Mode LOAD/STORE File Operation menuLOAD/STORE from Execute Menu list Setting of menu items Maintenance Color SAT/PHASE Correction Setting of menu items Appearance Unit inch mm Specifications Input/output signal Eastern Zone