How to set up the system
Control exercised from the AW-CB400
When using the
For capturing the camera statuses, and synchronizing the data. (Statuses of panel switches only)
For setting DTL to either ON or OFF.
For selecting GAIN L, M, H or S1.
• S2 and S3 cannot be set.
For switching between CAM or
BAR.
For controlling the MASTER
PEDESTAL. (−150 to +150)
For controlling IRIS AUTO,
MANU and LOCK.
For controlling the iris when
IRIS is set to MANUAL.
For switching the GAIN/PED display and controller setting menu display. For details on the camera’s functions, open the camera’s menu and select the settings.
When these switches are pressed while their lamps are off, the PRESET, USER1 and USER2 files are opened, respectively.
When any one of these switches is pressed while its lamp is lighted, the CURRENT file is opened. The switch lamp lights while the file is being opened.
For executing AWB.*1
For executing ABB.*1
For controlling R/B GAIN.
For controlling R/B PED.
These are the OPTION switches, and each switch makes it possible to control one of the items listed below. (The items are set on the controller setting menu.)
•Camera menu operations
A:MENU B: ENTER
C: UP | D: DOWN |
•ZOOM TELE/WIDE control
•FOCUS NEAR/FAR control
•ND FILTER control
•DIGITAL EXTENDER control
*1: The lamp of the ABB or AWB switch flashes while automatic white balance or automatic black balance is being executed, respectively. When ABB or AWB is completed successfully, the corresponding lamp goes off; when it is not completed successfully, it lights up.
When changing the panel display for use with the
Ver.2.00 or a subsequent version of the
To check the software version of your
- 18 -
