How to set up the system
Configuration example 1: Connection of camera controller
Use multi cable supplied with
Lens
AK-HC1800N
Select “1” as the PROTOCOL setting.
HD SDI OUT
IRIS
Multi cable
(POWER + CONTROL)
AC adapter AW-PS510AN
Monitor
Camera controller
Before connecting the cables, be sure to set the power switch of AC adapter to OFF. Connect the multi cable to the interface connector of the camera, and the opposite
side to camera controller.
Set the AC adapter power switch to ON, then the camera can be controlled. After shooting, set the AC adapter power switch to OFF.
- 14 -
