Panasonic AV-HS410N 13

Installation and connections (Be sure to ask your dealer.)

1Turn off the power of the unit, and disconnect the power cable.

2Loosen the two screws of SLOT A or SLOT B at the back of the unit, and remove the blank panel.

SLOT B

SLOT A

Screw

Blank panel

Screw

3Align the option board with the guide rails, and insert it slowly.

Insert it until it will go no further. Take care not to exert excessive force while doing this since that may damage the connector inside.

4Mount the option board in place using the two screws. Clamping torque: 0.7 N•m

		DVI	-I
	G OUTPUTS	DVI
	G OUTPUTS
	/ ANALO
DVI	Pr

Pb

Y

Screw

Screw

5After connecting the necessary cables, plug the power cable into the power outlet, and turn on the power.

13

Contents

Page Page WARNING: CAUTION: Page Read this first Before use Features Accessories Required computer environment wwOverview wwConcerning the ratings display wwDisclaimer of warranty wwNetwork security wwConcerning differences in the system versions Page Page Option boards (sold separately) Handle carefully Use the product in an ambient temperature of 0 °C to 40 °C (32 °F to 104 °F) Power off before connecting or disconnecting cables Avoid humidity and dust Maintenance wwInstallation precautions wwHow to install the option boards Page wwConnections with other devices qqConnections when implementing gen-lock(frame synchronizer OFF) qqConnections when not implementing gen-lock(frame synchronizer ON) 1-1.Control panel 1-1-1.Crosspoint area Page 1-1-2.Memory/wipe pattern/number key area 1-1-3.User button area 1-1-4.Transition area Page 1-1-5.Display area Page 1-1-6.Positioner area 1-1-7.Memory card area qqConcerning memory cards 1-2.Rear panel area 2-1.Turning the unit’s power on and off 2-2.Basic menu operations Page 2-2-2.Keyboard screen operations 2-2-3.Menu delegation function 2-2-4.Setting the system format 2-2-5.Setting the date and time