2. Preparations
One system format (input/output signal) can be selected.
1Press the sbutton to light its indicator, and display the System menu.
2Use [F1] to display the Format sub menu.
3Use [F2], select the format using the Format item, and press the [F2] to enter the selection.
The user can set the date and time to be used as the memory card’s time stamp.
Be absolutely sure to set them when an memory card is to be used.
Setting the date
1Press the sbutton to light its indicator, and display the System menu.
2Use [F1] to display the Date sub menu.
Setting the 16:9 squeeze mode
When the 16:9 squeeze mode is selected, a border width (wipe or PinP) is established that considers cases where SD format images are to be converted into the 16:9 aspect ratio and used.
This setting is possible when SD is selected as the system format setting.
On the Format sub menu, use [F4] to select whether to support the squeeze mode using the 16:9 Squeeze item.
On | The squeeze mode is supported. |
Off | The squeeze mode is not supported. |
Border width (graphical representation) when the squeeze mode is supported
Squeeze (4:3) | 16:9 |
3Use [F2] to set the year using the Year item.
4Use [F3] to set the month using the Month item.
5Use [F4] to set the day using the Date item.
6Press the [F5] to enter the year/month/day.
Setting the time
1On the System menu, use [F1] to display the Time sub menu.
2Use [F2] to set the hour using the Hour item.
3Use [F3] to set the minutes using the Minute item.
4Use [F4] to set the seconds using the Second item.
5Press the [F5] to enter the hour/minutes/seconds.
32