2. Preparations

2-2-2. Keyboard screen operations

When a name such as the name of the input signal material, name of the memory or name of the data to be saved on an memory card is to be changed, display the keyboard screen, and input the characters.

When the rotary encoder [F2] to [F5] that corresponds to the item (character input box) whose name is to be changed is pressed, the keyboard screen appears on the built-in display.

Character input area

When the keyboard screen is displayed, use rotary encoders [F1] to [F5] to input the characters (alphanumerics and symbols).

[F1]: CURSOR

Turn [F1] to move the cursor inside the character input area.

[F2]: UP/DOWN, [F3]: LEFT/RIGHT

When selecting characters on the keyboard, turn [F2] to move up or down, or turn [F3] to move to the left or right. When [F2] or [F3] is then pressed, the character selected is entered.

The character selected is reflected in the character input area.

ppWhen Shift is selected and pressed, the keyboard display is switched (between upper-case letters, lower- case letters and symbols).

[F4]: OK

When [F4] is pressed, the name which has been input is entered, and reflected in the unit.

At this point, the keyboard screen is cleared, and the original screen is restored.

[F5]: CANCEL

When [F5] is pressed, the name which has been input is canceled.

At this point, the keyboard screen is cleared, and the original screen is restored.

2-2-3. Menu delegation function

When the buttons listed below are double-clicked, the specified menu is selected. (The menu delegation function) The operation corresponding to the button pressed is also executed.

 

Button

Menu selected

Crosspoint area (AUX bus selector buttons)

 

KEY

Key menu/Adjust sub menu

 

 

When the chroma key is selected:

 

 

Chroma Key menu/Adjust sub menu

 

PinP1

PinP1 menu/Position sub menu

 

PinP2

PinP2 menu/Position sub menu

 

DSK

DSK menu/Adjust sub menu

Transition area

 

 

BKGD

Time menu/BKGD sub menu

 

KEY

Time menu/Key sub menu

 

WIPE

Background menu/Border sub menu

<Menu delegation setting>

This setting is used to enable (turn on) or disable (turn off) the menu delegation function.

1Press the sbutton to light its indicator, and display the Config menu.

2Use [F1] to display the Operate sub menu.

3Use [F5] to set enable or disable for the menu delegation function at the Delegation item.

OnEnable

OffDisable

31