2. Preparations
List box: | Numeric value input box: |
1Press [F2] to [F5] to display the list box.
2Turn [F2] to [F5] clockwise or counterclockwise to select the setting.
ppThe setting of an item whose selected setting does not blink will be reflected in the unit as soon as it has been selected.
ppThe setting of an item whose selected setting blinks is reflected in the unit by pressing [F2] to [F5].
3Press [F2] to [F5] again to close the list box.
Selector button:
When a rotary encoder [F2] to [F5] is pressed, the setting is switched between “On” and “Off.”
Execution buttons:
When a rotary encoder [F2] to [F5] is pressed, the corresponding function is executed.
Turn a rotary encoder [F2] to [F5] to change the numeric value.
When a rotary encoder [F2] to [F5] is held down, the numeric value is returned to its initial value.
A numeric value bar is displayed and its display is linked to the numeric value.
Inputting numeric values using the number keys
1 Press [F2] to [F5] to establish the mode in which numeric values.can be input using the number keys.
ppUse the button to input the decimal point.
If a numeric value has a decimal point which is not input, it will be treated as an integer, and its decimal places willPbe set to zero (“0”).
ppPress the button to switch the numeric value between a positive and negative value. Each time this button is pressed, the numeric value is switched from positiveC to negative (or vice versa).
ppIf the button is pressed when a numeric value has been input, the numeric value will be returned to the value prior to the change.
2Input the numeric values using the number keys, and press the [TAKE ENTER] button.
The values which have been input are entered and reflected in the unit.
ppWhen a numeric value is input using the number keys and a rotary encoder from [F1] to [F5] is operated, the input value is cleared, and the numeric value prior to input is restored.
Character input box:
When a rotary encoder [F2] to [F5] is pressed, the keyboard screen is displayed.
Use rotary encoders [F1] to [F5] to input the characters.
Refer to
30