1. Parts and their functions

[MENU OFF]:

This button clears the menu display and switches to the image-only display.

[PICT]:

When this button is pressed and lit, images are displayed on the built-in display.

[WFM/VECT]:

When this button is pressed and lit, waveforms (WFM: waveform monitor) or vectors (VECTOR: vectorscope) are displayed on the built-in display.

Each time the button is pressed, the display switches between WFM and VECTOR.

ppWFM (waveform monitor) display

ppVECTOR (vectorscope) display

Menu selection buttons (MENU SELECT)

Each time one of these buttons is pressed, the menu of the function indicated at the top or bottom of the button is selected.

The button of a selected menu lights up in amber.

[MENU HOLD] button

This button is used to keep a menu on the display. When it is pressed while a menu is displayed, the menu displayed will not be switched to another menu even when one of the menu selection buttons is pressed.

While the [MENU HOLD] button is pressed, the [MENU HOLD] button lights up in amber.

Rotary encoders [F1] to [F5]

These are used to set the parameters which are displayed on the built-in display.

Refer to “2-2. Basic menu operations”.

24