1. Parts and their functions
User buttons (USER BUTTON) [U1 to U8]
These are used to assign some functions of the menu | | |
settings to the [U1] to [U8] buttons on the Config menu. | ||
|
Refer to
and Settings> Operating Instructions). | U1 | U2 | U3 | U4 | U5 | U6 | U7 | U8 |
USER BUTTON
| N/R | R |
| WIPE DIRECTION | |
| BKGD | KEY |
| MIX | MIX |
WIPE | WIPE | |
| MIX | WIPE |
|
|
|
| CUT | AUTO |
|
|
|
[BKGD] button
This executes the background transition when the [AUTO] button () or fader lever () has been operated.
When the [BKGD] button is pressed and it is selected, its indicator lights in amber.
If the [KEY] button () is now pressed, the indicator goes off, and the de‑selected status is established.
When the [BKGD] button and [KEY] button () are pressed at the same time, both buttons are set to the selected status.
[KEY] button
This executes the key transition when the [AUTO] button () or fader lever () has been operated.
When the [KEY] button is pressed and it is selected, its indicator lights in amber.
If the [BKGD] button () is now pressed, the indicator goes off, and the
MIX, WIPE selection status LEDs
These light up to indicate whether MIX or WIPE has been selected when background transitions or key transitions are executed.
|
| |
KEY | FTB | |
ON | ON | |
PinP1 | PinP2 | |
| ||
ON | ON |
|
| ON | |
| DSK |
|
[MIX] button
This is used to switch the A and B bus images while making them overlap.
During the transition, the A and B bus output total is kept at 100 %.
When the [MIX] button is pressed and it is selected, its indicator lights in amber.
If the [WIPE] button () is now pressed, it goes off, and the
[WIPE] button
This is used to execute the transition using the pattern selected by the number key ().
When the [WIPE] button is pressed and it is selected, its indicator lights in amber.
If the [MIX] button () is now pressed, it goes off, and the
21