Panasonic AW-E860L manual $ Automatic white balance control AWC, Adjustment by Camera, 21 E

Adjustment

$ Automatic white balance control (AWC)

There are two white balance memories, “AWC A” or “AWC B” for two different light sources colour temperatures, with the automatic white balance setting. Then, when the two different light sources are encountered, you may operate the camera properly by simply change the white balance mode to either AWC A or AWC B. There is no need to readjust the camera to the ambient conditions.

❈The preset conditions will be renewed whenever you input new conditions.

1.Turn the white balance selection switch to either “AWC A” or “AWC B” of RCU or select the white balance mode either AWC A or AWC B by menu.

2.Aim the camera at a white object (a white wall or a white handkerchief) and zoom in to enlarge the image as much as possible.

[ADJUSTMENT by CAMERA]

3.In normal shooting mode:

Press the ITEM/AWC switch for over 2 second.

CAMERA

ITEM/AWC switch

[ADJUSTMENT with the RCU (RCB, hybrid control panel)]

4.When the AUTO set switch is turned to AWC, the white balance will be automatically set. While the system is being set, auto warning indicator (LED) blinks and it goes out when the white balance setting is completed. If the lamp remains lit, the setting must be tried again.

RCU (RCB)

AUTO LED

AUTO set switch

- 21 (E) -