Panasonic DMC-FX10, DMC-FX12 operating instructions Charging the Battery with the Charger

Models: DMC-FX10 DMC-FX12

1 115
Download 115 pages 3.97 Kb
Page 11
Image 11

Charging the Battery with the Charger

Preparation

3 Detach the battery after charging is completed.

The battery is not charged when the camera is shipped. Charge the battery before use.

Attach the battery with attention to the direction of the battery.

2 Connect the charger to the electrical outlet.

Charging starts when the [CHARGE] indicator (_,)lights green.

Charging is complete when the [CHARGE] indicator _'_turns,) off (after about 130 minutes).

*When the [CHARGE] indicator flashes, read P12.

After charging is completed, be sure to disconnect the charger from the electrical outlet.

The battery becomes warm after using it and during and after charging. The camera also becomes warm during use. This is not a malfunction.

The battery will be exhausted if left for a long period of time after being charged.

Recharge the battery when it is exhausted.

The battery can be charged even if it is not fully discharged.

Use the dedicated charger and battery.

Charge the battery with the charger indoors.

Do not disassemble or modify the charger.

11

VQT1C 14

Page 11
Image 11
Panasonic DMC-FX10, DMC-FX12 operating instructions Charging the Battery with the Charger