Panasonic DMC-FX12 Message Display, Card Do not leave the card where Temperature is high, where

Models: DMC-FX10 DMC-FX12

1 115
Download 115 pages 3.97 Kb
Page 92
Image 92

Others

Charger

If you use the battery charger near a radio, the radio reception may be disturbed. Keep the charger 1 m

(3.28 feet) or more away from radios.

The charger may generate whirring

sounds when it is being used. This is not a malfunction.

After using the charger, be sure to disconnect it from the electrical outlet. (A very small amount of current is consumed if it is left connected.)

Keep the terminals of the charger and battery clean.

Card

Do not leave the card where the

temperature is high, where

electromagnetic waves or static electricity are easily generated or exposed to direct sunlight.

Do not bend or drop the card.

The card may be damaged or the recorded content may be damaged or deleted.

Put the card in the card case or the storage bag after use and when storing or carrying the card.

Do not allow dirt, dust or water to get into the terminals on the back of the card and do

not touch the terminals with your fingers.

When not using the camera for a long period of time

Store the battery in a cool and dry place with a relatively stable temperature. [Recommended temperature:

15 °C to 25 °C (59 r'Fto 77 °F), Recommended humidity: 40% to 60%]

Always remove the battery and the card from the camera.

If the battery is left inserted in the camera, it will discharge even if the camera is turned off. If the battery continues to be left in the camera, it will discharge excessively and may become unusable even if charged.

When storing the battery for a long period of time, we recommend charging it once a

92

year. Remove the battery from the camera and store it again after it has completely discharged.

We recommend storing the camera with a

desiccant (silica gel) when you keep it in a closet or a cabinet.

Message Display

Confirmation messages or error messages will be displayed on the screen in some oases.

The major messages are described below as examples.

[THIS MEMORY CARD IS PROTECTED]

The Write-Protect switch on the SD Memory Card and the SDHC Memory Card are moved to [LOCK]. Move the switch back to unlock it. (P14, 76, 80)

[NO VALID PICTURE TO PLAY] Record a picture or insert a card with a recorded picture and then play it.

[THIS PICTURE IS PROTECTED] Delete or overwrite the picture after canceling the protect setting. (P76)

[THIS PICTURE CANNOT BE DELETED]/ [SOME PICTURES CANNOT BE DELETED]

Pictures not based on the DCF standard

cannot be deleted. If you want to delete some pictures, format the card after saving necessary data on a PC etc. (P80)

[NO ADDITIONAL DELETE SELECTIONS CAN BE MADE]

You have exceeded the number of pictures that can be set at one time with [MULTI] in [DATE STAMP] or [MULTI DELETE].

Delete the set pictures or stamp the date information on them and then do the

operation for any remaining pictures. More than 999 favorites have been set.

[CANNOT BE SET ON THIS PICTURE]/ [CANNOT BE SET ON SOME PICTURES]

DPOF print cannot be set for pictures not based on the DCF standard.

VQT1014

Page 92
Image 92
Panasonic DMC-FX12, DMC-FX10 Message Display, Card Do not leave the card where Temperature is high, where