![](/images/new-backgrounds/1248956/24895641x1.webp)
LCD Monitor Display/
Switching the LCD Monitor Display
•Screen display in normal picture mode [_ ] (Initial settings)
12 34 567
12 11
1 Recording mode
2Flash mode (P35)
•If you press the shutter button halfway when the flash is activated, the flash icon turns red.
3 AF area (P22)
•The AF area displayed is bigger than usual when taking pictures in dark places.
4 Focus (P22)
5 Picture size (P61)
6 Quality (P61) _'_'_:Jitter alert (P24)
7 Battery indication
•The indication turns red and blinks if the remaining battery power is exhausted. (The status indicator blinks when the LCD monitor turns off.) Recharge the battery or replace it with a fully charged battery.
•It does not appear when you use the camera with the AC adaptor
8 Number of recordable pictures (P99)
9 Recording state
10
Preparation
•The access indication lights red when pictures are being recorded on the
•Do not do the following when the access indication lamps lights, The card or the data on the card may be damaged and this unit may no
longer operate normally,
-Remove the battery or the card (when using a card),
-Disconnect the AC adaptor,
•Do not do the above when picturesare being read or deleted or the
•The access time for the
11 Shutter speed (P22)
12 Aperture value (P22)
•If the exposure is not adequate, the aperture value and the shutter speed turn red. (They do not turn red when the flash is activated.)
13 Optical Image Stabilizer (P41)
•Refer to P88 for information about other screen displays.
•Switching the screen display
You can change the screen display by pressing [DISPLAY]. This allows you to display information while taking pictures such as the picture size or the number of recordable pictures or take pictures without displaying any information. Refer to P32 for details.
21
VQT1C 14