Connecting to other equipment
•[NUM. OF PRINTS]
Set the number of prints. *You can set up to 999 prints.
•[PAPER SIZE]
(Paper sizes that can be set with this unit)
The paper sizes are displayed on pages 1/2 and 2/2. Press • to select.
1/2
Settings on the printer are 3rioritized.
[L/3.5"x 5"] 89 mmx 127 mm
[2LI5"x7"] 127 mmx 178 mm
[POSTCARD] 100 mm×148 mm
[A4]210 mmx297 mm 2/2
[CARD SIZE] 54 mm×85.6 mm
[10x15cm] 100 ram× 150 mm
[4"x6"] | 101.6 mmx 152.4 mm |
[8"x 10"] 203.2 minx264 mm
[LETTER] 216 mmx279.4 mm
+These items cannot be displayed when the printer does not support the paper sizes.
•[PAGE LAYOUT]
(Layouts for printing that can be set with this unit)
Settings on the printer are 3rioritized.
B1 picture with no frame on 1 page
In7 1 picture with a frame on 1 page
_ | 2 pictures | on | 1 page |
AISI_ | 4 pictures | on | 1 page |
•An item cannot be selected if the printer does not support the page layout.
•Setting the date printing with the
DPOF print in advance
•We recommend setting DPOF date printing with [DPOF PRINT] (P74) in advance when the printer supports it. If you select [DPOF PICTURE], printing starts and the recording date is printed.
86
•Layout printing
•When printing the same picture on 1 sheet of paper
For example, if you want to print the same picture 4 times on 1 sheet of paper, set [PAGE LAYOUT] to [ BUlB] and then set [NUM. OF PRINTS] to 4 for the picture that you want to print.
•When printing different pictures on 1 sheet of paper
For example, if you want to print 4 different pictures on 1 sheet of paper, set
Ir4H
[PAGE LAYOUT] to [_] and then set [COUNT] in [DPOF PRINT] (P74) to 1 for each of the 4 pictures.
•Do not disconnect the USB connection cable when the cable disconnection warning icon [_': ] is displayed. (Depending on the printer, the icon may not be displayed.)
•If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, press [MENU/SET] and stop printing at once. If not printing, disconnect the USB connection cable.
•The camera is receiving an error message from the printer when the [O] indication lights orange during printing. After finishing printing, make sure there are no problems with the printer.
•If the total number of DPOF prints or the number of DPOF pictures printed is high, pictures may be printed several times. The remaining number of prints indicated may differ from the number set. This is not a malfunction.
•With date printing, the setting on the printer may take priority over the setting on the camera. Check the date print setting on the printer also.
•The message [USB MODE CHANGED. PLEASE REMOVE THE USB CABLE.]
VQT1C14
