Panasonic DMC-FX10, DMC-FX12 Card optional, Inserting and Removing the Battery

Inserting and Removing the Battery/

the Card (optional)

•Check that this unit is turned off.

•Prepare a card. (optional)

•You can record or play back pictures on the built=in memory when you are not using a card. (P14)

] Slide the release lever in the direction of the arrow and open

the card/battery door.

•Always use genuine Panasonic batteries (CGA=S005A).

•If you use other batteries, we cannot guarantee the quality of this product.

2Battery:

Insert it fully being careful about the direction you insert it.

Pull the lever _ in the direction of the arrow to remove the battery. Card:

Push it fully until it clicks being

careful about the direction you insert it.

To remove the card, push the card until it clicks, then pull the card out upright.

Preparation

(B): Do not touch the connection terminals of the card.

•The card may be damaged if it is not fully inserted.

30 Close the card/battery door.

Slide the release lever in the direction of the arrow.

O

•If the card/battery door cannot be

completely closed, remove the card, check its direction and then insert it

again.

•Remove the battery after use. Store the removed battery in the battery carrying case (supplied).

•Do not remove the card or the battery while the card is being accessed. The data may be damaged. (P21)

•Do not remove the battery until the LCD monitor and the status indicator

(green) turn off as the settings on the camera may not be stored properly.

•The supplied battery is designed only for the camera. Do not use it with any other equipment.

•Do not insert or remove the battery or the card while this unit is turned on.

The data on the built-in memory or the card may be damaged. Be particularly careful while the built-in memory or the card is being accessed. (P21)

•We recommend using a Panasonic card.

13

VQT1C 14