Connecting to o#ler equipment
appearsifyouchangethemodedialtoa • _ White: to the audio input socket modeotherthan[1_]whilethecamera andtheprinterareconnectedSetthe. 3 Turn the TV on and select external
modedialto[ll_]againandthen input. disconnecttheUSBconnectioncableIf.
thishappensduringprinting,stopprinting4 Turn the camera on. andthendisconnecttheUSBconnection
cable.
Playing Back Pictures
on a TV Screen
N]
•Playing back pictures using the AV cable (supplied)
•Set the [TV ASPECT]. (P20)
•Turn this unit and the TV off.
Connect the AV cable (_)
(supplied) to the [AV OUT] socket on the camera.
•Connect the AV cable with the [m_.] mark facing the [_1] mark on the [AV OUT] socket.
•Hold the AV cable at _ and insert straight in or take straight out.
2 Connect the AV cable to the video
input and the audio input sockets on the TV.
• 0 Yellow: to the video input socket
•Depending on the aspect setting, black bands may be displayed on the top and bottom or the left and right of the pictures.
•Do not use any other AV cables except the supplied one.
•Audio playback is monaural.
•Read the operating instructions for the TM
•When you play back a picture vertically, it may be blurry.
•You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system when you set
[VIDEO OUT] in the [SETUP] menu. Even if you set [VIDEO OUT] to [PAL], the output signal will still be NTSC in the recording mode.
•Playing back pictures on a TV with an SD Memory Card slot
Still pictures recorded on an SD Memory Card can be played back on a TV with an SD Memory Card slot.
•Depending on the TV model, pictures may not be displayed on the full screen.
•Motion pictures cannot be played back. To play back motion pictures, connect the camera to the TV with the AV cable (supplied).
•You may not be able to play back MultiMediaCards.
87
VQT1C 14
