![](/images/new-backgrounds/1248956/248956161x1.webp)
Connecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC. The software [LUMIX Simple Viewer] or [PHOTOfunSTU
(for Windows ®) in the
If you use "Windows g8/98SE", install the USB driver and then connect it to
the computer.
For information about the software in the
(_A):USB connection cable (supplied)
(_B):AC adaptor
Connecting to o#ler equipment
• Use a battery with sufficient battery power or the AC adaptor
• Turn the camera off before inserting or removing the cable for the AC adaptor
• Set the camera to a mode other than [1_] mode.
1 Turn on the camera and the PC.
2 Connect the camera to a PC via
the USB connection cable _) (supplied).
•Connect the USB connection cable with the [m_.] mark facing the [41] mark on the [DIGITAL] socket,
•Hold the USB connection cable at _'c_ and insert straight in or take straight out. (If you forcibly insert the USB connection cable at a slant or upside down you can deform the connection terminals and damage the camera or the connected equipment.)
@: This message appears during data transfer.
[Windows]
The drive appears in the [My Computer] folder.
•If you are connecting the camera to a PC for the first time, the required driver is installed automatically so that the camera can be recognized by "Windows Plug and Play". The drive then appears on the [My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
•The drive is displayed as [LUMIX] when you connect the camera with no card inserted.
81
VQT1C 14