Panasonic DMC-LS2 operating instructions Canceling High angle mode

Advanced

Recording a picture with the camera held high above your head (High angle mode)

SCN1 SCN2

The LCD monitor becomes easier to see when the camera is held in the following position. This is useful when you cannot get close to the subject because there is a person in the way.

Press [HIGH ANGLE] A for

1 second to display the High angle mode icon [ ] B.

3 3

ON :PRESS ANGLEHIGH FOR 1 SEC.

•High angle mode is activated. The LCD monitor becomes brighter and easier to see when the camera is held away from you. (However it becomes more difficult to see when looked at straight on.)

∫Canceling High angle mode

Press and hold [HIGH ANGLE] again for 1 second or turn the camera off.

•High Angle mode is also canceled if power save mode is activated.

•Pictures are displayed on the LCD monitor with increased brightness in High angle mode. Therefore, some subjects may look different on the LCD monitor. However, this does not affect the recorded pictures.

•You may not notice the High angle mode effect if the LCD monitor is difficult to see because of light from the sun etc. shining on it. In this case, we recommend using your hand or another object to block the light when using the camera.

•High angle mode is not activated in the following cases:

–In simple mode []

–In playback mode

–While the menu screen is displayed

–During Review

37

VQT0V10