Panasonic DMC-LS2 Ends of the pictures are cut at printing, Camera becomes warm, Lens clicks

Others

6:The picture cannot be printed when the camera is connected to a printer.

•Does the printer support PictBridge?

–You cannot print pictures with printers which do not support PictBridge. (P77)

•Set [USB MODE] to [PictBridge (PTP)]. (P22, 77)

7:The ends of the pictures are cut at printing.

•When using a printer with a trimming or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.)

•When you order photo studios to print pictures, ask the photo studio if the pictures can be printed with both ends.

∫Others

1:An unreadable language was selected by mistake.

•Press [MENU/SET], select the [SETUP]

menu icon [ ] and then select the [ ] icon to set the desired language. (P22)

2:The setting for the auto review function is disabled.

•Are you taking pictures using auto bracket (P43)? Is the camera in burst mode (P45) or motion picture mode [ ] (P54)?

–In these cases, you cannot set the auto review function in the [SETUP] menu.

3:The camera becomes warm.

•The surface of the camera may become warm during use. This does not affect the performance or quality of the camera.

4:The lens clicks.

•When the brightness changes due to zoom or camera movement etc., the lens may click and the picture on the screen may drastically change.

However, the picture is not affected.

90

The sound is caused by the automatic adjustment of the aperture.

This is not a malfunction.

5:The clock is reset.

•If you do not use the camera for a long time, the clock may be reset. When the message [PLEASE SET THE CLOCK] appears, set the clock again. (P18)

•When you take a picture before setting

the clock, [0:00 0. 0. 0] is recorded.

6:Colors appear on the picture which were not found in the actual scene.

•Depending on the zoom magnification, the picture may have some colored fringes around the subject. This is called chromatic aberration and may be more visible when recording distant subjects. However this is not a malfunction.

7:The file numbers are not recorded consecutively.

•When you perform an operation after taking a certain action, the pictures may be recorded in folders with different numbers from the ones used prior to the operation. (P76)

VQT0V10